真空泵标准汇总

标准编号 标准中文名称 标准英文名称 GB/T13930-1992 水环真空泵和水环压缩机气量测定方法 Methods for the measurement of volume flow of gas ofwater-ring vacuum pump and compressor GB/T13929-1992 水环真空泵和水环压缩机试验方法 Methods of testing for water-ring vacuum pumps and compressors JB/T5971-1992(2005复审) 单级多旋片式真空泵 　 JB/T7266-1994 容积真空泵 性能测量方法 　 JB/T7255-1994(2005复审) 水环真空泵和水环压缩机 　 JB/T8472.1-1996 蒸汽流真空泵性能测定 第一部分:抽气速率(体积流率)的测定 　 JB/T8472.2-1996 蒸汽流真空泵性能测定 第二部分:临界前级压力的测定 　 JB/T1246-1997 滑阀真空泵 　 JB/T9808.1-1999 奶用真空泵 技术条件 　 JB/T9808.2-1999 奶用真空泵 试验方法 　 JB/T8106-1999 容积真空泵噪声测量方法 　 JB/T8944-1999 单级旋片真空泵 　 JB/T8107-1999 容积真空泵振动测量方法 　 JB/T10134-1999 带真空泵交流发电机 技术条件 　 JB/T53019-1999 油扩散真空泵 产品质量分等 　 JB/T53022-1999 滑阀真空泵 产品质量分等 　 JB/T53014-1999 单级多旋片真空泵 产品质量分等 　 JB/T53018-1999 罗茨真空泵 产品质量分等 　 JB/T53017-1999 旋片真空泵 产品质量分等 　 JB/T53016-1999 往复真空泵 产品质量分等 　 JB/T53299-1999 单级水环真空泵 产品质量分等 　 JB/T53020-1999 油扩散喷射真空泵 产品质量分等 　 JB/T53301-1999 两级水环真空泵 产品质量分等 　 NF E51-291-1996 压缩机和真空泵.安全要求.第2部分:真空泵 (Compressors and vacuum pumps. Safety requirements. Part 2 : vacuum pumps.) NF E51-290-1996 压缩机和真空泵.安全要求.第1部分:压缩机 (Compressors and vacuum pumps. Safety requirements. Part 1 : compressors.) NF X10-501-1976 真空技术.词汇.真空泵 (Vacuum technology. Vocabulary. Vacuum pumps.) ANSI/ASME PTC 9-1974 性能试验规范.容积式压缩机、真空泵和鼓风机 (Performance Test Code - Displacement Compressors, Vacuum Pumps and Blowers) ANSI/UL 1450-2003 电动空气压缩机、真空泵和涂漆设备 (Motor-Operated Air Compressors, Vacuum Pumps, and Painting Equipment ) ASME PTC 9 Erratum-1972 容积式压缩机,真空泵和鼓风机.正误表 (Displacement compressors, vacuum pumps, and blowers; Erratum) ASME PTC 9-1970 容积式压缩机,真空泵和鼓风机 (Displacement compressors, vacuum pumps, and blowers) BS EN 1012-1-1997 压缩机和真空泵.安全要求.压缩机 (Compressors and vacuum pumps - Safety requirements - Compressors) BS EN ISO 14847-1999 转式变容真空泵.技术要求 (Rotary positive displacement pumps - Technical requirements) BS EN 1012-2-1997 压缩机和真空泵.安全要求.真空泵 (Compressors and vacuum pumps - Safety requirements - Vacuum pumps) EN 1012-1-1996 压缩机和真空泵 安全要求 第1部分：压缩机 Compressors and vacuum pumps - Safety requirements - Part 1: Compressors EN 1012-2-1996 压缩机和真空泵 安全要求 第2部分：真空泵 Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps DIN EN 1012-1-1996 压缩机和真空泵.安全要求.第1部分:压缩机 (Compressors and vacuum pumps, safety requirements - Part 1: Compressors; German version EN 1012-1:1996) DIN EN 1012-2-1996 压缩机和真空泵.安全要求.第2部分:真空泵 (Compressors and vacuum pumps, safety requirements - Part 2: Vacuum pumps; German version EN 1012-2:1996) DIN 28432-1996 真空技术.膜片真空泵的验收规则 (Vacuum technology - Acceptance specifications for diaphragm vacuum pumps) DIN 45635-13-1977 机器噪声测量.空气载声测量.包面法.空气压缩机包括真空泵（活塞式.涡轮式和喷射式压缩机） (Measurement of airborne noise emitted by machines; enveloping surface method, compressors, vacuum pumps included (displacement-, turbo- and jet compressors)) DIN 28426-2-1976 真空技术.旋转活塞真空泵的验收规则.高真空范围内的摇杆式活塞真空泵 (Vacuum technology; acceptance specifications for roots vacuum pumps for the range of medium vacuum) DIN 28400-2-1980 真空技术.名称和定义.真空泵 (Vacuum technology; terms and definitions, vacuum pumps) DIN ISO 3019-3-1984 液压传动.变容真空泵和马达.装配法兰盘和轴端的尺寸及识别代码.第3部分:多边形法兰盘(包括圆形法兰盘) (Hydraulik fluid power; positive displacement pumps and motors; dimensions and identification code for mounting flanges and shaft ends; part 3: polygonal flanges (including circular flanges)) DIN ISO 3019-2-1991 液压传动.变容真空泵和马达.装配法兰盘和轴端的尺寸及识别代码.第2部分:两孔与四孔法兰与轴端.米制系列 (Hydraulic fluid power; positive displacement pumps and motors; dimensions and identification code for mounting flanges and shaft ends; part 2: 2 and 4-hole flanges and shaft ends, metric series; identical with ISO 3019-2:1986) DIN 28426-1-1983 真空技术.旋转真空泵.在近似真空和高真空范围内的闭塞阀真空泵和旋转阀真空泵的验收规则 (Vacuum technology; acceptance specifications for rotary plunger vacuum pumps, sliding vane rotary vacuum pumps and rotary piston vacuum pumps for the ranges of rough and medium vacuum) DIN 28431-1987 真空技术.液体环式真空泵的验收规程 (Vacuum technology; acceptance specifications for liquid ring vacuum pumps) DIN 28427-1983 真空技术.蒸气压低于1mbar的扩散泵和蒸气喷射真空泵的验收规则 (Vacuum technology; acceptance specifications for diffusions pumps and vapour jet vacuum pumps for vapour pressures of the pump fluid 1 mbar) DIN 28430-1984 真空技术.以蒸汽作为驱动介质的蒸汽喷射真空泵和蒸汽喷射压缩机用测量规则 (Vacuum technology; rules for the measurement of steam jet vacuum pumps and steam jet compressors using steam as the working fluid) JB/T6921-2004 罗茨真空泵机组 　 JB/T8540-2004 水蒸汽喷射真空泵 　 JB/T10462-2004 水喷射真空泵 　 JB/T7265-2004 蒸汽流真空泵 　 UL 1450-2003 电动空气压缩机、真空泵和喷漆设备 (Motor-operated air compressors, vacuum pumps, and painting equipment) JIS B8384-2000 液压.变容真空泵、机动泵和整体传动装置.稳态性能测定 (Hydraulic fluid power -- Positive displacement pumps, motors and integral transmissions -- Determination of steady-state performance) JIS B8317-2-1999 蒸气真空泵.性能特性的测定.第2部分:临界后压力的测定 (Vapour vacuum pumps --Measurement of performance characteristics -- Part 2: Measurement of critical backing pressure) JIS B8323-2003 水封式真空泵 (Water ring vacuum pumps) JIS B8317-1-1999 蒸气真空泵.性能特性的测定.第1部分:流量容积比率的测定(泵速) (Vapour vacuum pumps -- Measurement of performance characteristics -- Part 1: Measurement of volume rate of flow (pumping speed)) JIS B8385-2000 液压.变容真空泵、机动泵和整体传动装置.参数定义和字母符号 (Hydraulic fluid power -- Pumps, motors and integral transmission -- Parameter definitions and letter symbols) JIS Z8126-2-1999 真空技术.词汇.第2部分:真空泵和相关条款 (Vacuum technology -- Vocabulary -- Part 2: Vacuum pumps and related terms) ISO 1607-2-1989 变容真空泵.性能特性测量.第2部分:极限压力的测量 (Positive-displacement vacuum pumps; measurement of performance characteristics; part 2: measurement of ultimate pressure) ISO 16330-2003 往复式变容真空泵和泵装置.技术要求 (Reciprocating positive displacement pumps and pump units - Technical requirements) ISO 3529-2-1981 真空技术.词汇.第2部分:真空泵和有关术语.三种语言版 (Vacuum technology; Vocabulary; Part 2 : Vacuum pumps and related terms Trilingual edition) ISO 1608-2-1989 蒸汽真空泵.性能特性的测量.第2部分:临界前级压力的测量 (Vapour vacuum pumps; measurement of performance characteristics; part 2: measurement of critical backing pressure) ISO 1608-1-1993 蒸汽真空泵.性能特性的测量.第1部分:容积流量速度的测量(泵速) (Vapour vacuum pumps; measurement of performance characteristics; part 1: measurement of volume rate of flow (pumping speed)) QB/T1444-1992 ZBK型轻式专用两叶罗茨真空泵 　 QB/T1445-1992 湿式罗茨真空泵性能测试方法 　 JB/T6533-2005 旋片真空泵 　 JB/T7674-2005 罗茨真空泵 　 JB/T7675-2005 往复真空泵 　 GB/T19955.1-2005 蒸汽流真空泵性能测量方法 第1部分：体积流率(抽速)的测量 　 GB/T19955.2-2005 蒸汽流真空泵性能测量方法 第2部分：临界前级压力的测量 　 GB/T19956.1-2005 容积真空泵性能测量方法 第1部分：体积流率(抽速)的测量 　 GB/T19956.2-2005 容积真空泵性能测量方法 第2部分：极限压力的测量 　 JB/T8540-2004 水蒸汽喷射真空泵 　 JB/T10462-2004 水喷射真空泵

控制阀及其附件作为控制回路中的重要元件，在现代制造业领域使用得越来越广泛。控制阀的正确设计、选型、安装、维护是工业过程测量和控制系统可靠运行的基础，是实现安全生产、高效率生产的重要保证。为了方便相关工程技术人员和管理人员查找和使用控制阀相关标准，促进控制阀相关标准的贯彻和实施，中国标准出版社第四编辑室根据相关行业生产的实际需要，对现行的控制阀相关标准进行了汇总整理，组织编辑了《工业过程控制阀标准汇编》。

标准编号 标准中文名称 标准英文名称 ANSI/FCI 91-1-1997 控制阀门密封的质量标准 (Standard for Qualification of Control Valve Stem Seals) ANSI/UL 753-1996 消防装置用自动供水控制阀的警报附件 (Alarm Accessories for Automatic Water-Supply Control Valves for Fire-Protection Service) BS EN 60534-2-5-2003 工业过程控制阀.流通能力.通过有段间恢复功能的多段控制阀的流体流量的校准公式 (Industrial-process control valves - Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery) ASTM F 1985-1999 气力操作的球形控制阀标准规范 (Standard Specification for Pneumatic-Operated, Globe-Syle, Control Valves) BS EN 60534-3-2-2001 工业过程控制阀.尺寸.蝶形阀除外的转式控制阀的端面距 (Industrial-process control valves - Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves) BS ISO 15407-2-2003 气压传动.五气口方向控制阀,规格18mm和26mm.有任选电接头的安装接口 (Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces with optional electrical connector) BS ISO 12238-2001 气压液动.方向控制阀门.转换时间的测量 (Pneumatic fluid power - Directional control valves - Measurement of shifting time) BS ISO 5599-1-2001 气压液动.五通方向控制阀.不带电连接器的安装接口表面 (Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces without electrical connector) BS ISO 5599-2-2001 气压液动.五通方向控制阀.任选电气连接器的安装接口面 (Pneumatic fluid power - Five-port directional control valves - Mounting interface surfaces with optional electrical connector) BS EN 60534-6-2-2001 工业过程控制阀.定位器装到控制阀的安装细则.旋转传动装置上安装的定位器 (Industrial-process control valves - Mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators) BS EN 1074-5-2001 供水阀门.适用性和专用要求的试验.控制阀门 (Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Control valves) BS EN 60534-8-3-2000 工业流程控制阀.噪声问题.控制阀的空气动力噪声预报法 (Industrial-process control valves - Noise considerations - Control valve aerodynamic noise prediction method) BS EN 60534-2-3-1998 工业过程控制阀.流量.试验程序 (Industrial-process control valves - Flow capacity - Test procedures) BS EN 60534-8-1-2001 工业过程控制阀.噪声问题.通过控制阀的动力噪声的实验室测量 (Industrial-process control valves - Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves) BS EN 60534-3-1-2000 工业过程控制阀.尺寸.带法兰的两路、球型、直立式控制阀门的面对面尺寸和带法兰的两路、球型、角度控制阀门 (Industrial-process control valves - Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle patter) BS EN 1349-2000 工业处理控制阀门 (Industrial process control valves) BS ISO 15407-1-2000 18mm和26mm五气口气动方向控制阀.无电插头的安装界面 (Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Mounting interface surfaces without electrical connector) BS ISO 11727-1999 气动流体力学.控制阀和其它元件的控制机械装置和气门的识别 (Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components) BS EN 60534-3-3-1998 工业过程控制阀.尺寸.对接焊接,两向,球型,垂直模式控制阀的末端对末端尺寸 (Industrial-process control valves - Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves) BS EN 60534-2-1-1999 工业过程控制阀 .流容.安装条件下液流规模方程 (Industrial-process control valves - Flow capacity - Flow capacity - Sizing equations for fluid flow under installed conditions) BS ISO 6263-1997 液压传动.补偿式流量控制阀.装配面 (Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces) BS ISO 10770-2-1998 液压传动.电模式液压控制阀.第2部分:三向流动控制阀的试验方法 (Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for three-way directional flow control valves) BS ISO 10770-1-1998 液压传动.电模式液压控制阀.第1部分:四向流动控制阀的试验方法 (Hydraulic fluid power - Electrically modulated hydraulic control valves - Test methods for four-way directional flow control valves) BS EN 60534-6-1-1998 工业过程控制阀 .控制阀调节器连接用安装元件.直线传动装置上调节器的安装 (Industrial-process control valves - Mounting details for attachment of positioners to control valves - Positioner mounting on linear actuators) BS ISO 7790-1998 液压传动.规格为03和05型的四油口标准设计叠阀和四油口定向控制阀.紧固尺寸 (Hydraulic fluid power - Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 - Clamping dimensions) EN 60534-8-1-2000 工业过程控制阀　第8部分：噪声的考虑　第1节：气动流流径控制阀产生的噪声的实验室测量 Industrial-process control valves - Part 8: Noise consideration; Section 1: Laboratory measurement of noise generated by hydrodynamic aerodynamic flow through control valves (IEC 60534-8-1:1986) EN 60534-8-4-1994 工业过程控制阀　第8部分：噪声问题　第4节：流动产生的噪声的预测 Industrial-process control valves - Part 8: Noise considerations - Section 4: Prediction of noise generated by hydrodynamic flow (IEC 60534-8-4:1994) EN 60534-8-3-2000 工业流程控制阀　.第8-3部分　噪声问题　通过控制阀的动力噪声预测法 Industrial-process control valves - Part 8-3: Noise considerations; Control valve aerodynamic noise prediction method (IEC 60534-8-3:2000) EN 1074-5-2001 供水阀门 目的要求的适应性和合适的认证试验 第5部分：控制阀门 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves EN 60534-3-1-2000 工业过程控制阀　第3－1部分：尺寸　法兰双通球形直型控制阀的端面间距尺寸和有法兰双通球型角型控制阀的 Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves (IEC 60534-3-1:2000) EN 60534-2-1-1998 工业过程控制阀　第2－1部分：流通能力　安装条件下流体流量的校准公式 Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions (IEC 60534-2-1:1998) EN 60534-1-1993 工业过程控制阀　第1部分　控制阀术语和一般考虑 Industrial-process control valves - Part 1: Control valve terminology and general considerations (IEC 60534-1:1987) EN 60534-3-2-2001 工业过程控制阀　第3部分：尺寸　第2节：无法兰控制阀（薄型蝶阀除外）的端面间距尺寸 Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves (IEC 60534-3-2:2001) EN 60534-3-3-1998 工业过程控制阀　第三部分：尺寸　对接焊接　两向　球型　垂直模式控制阀的末端对末端尺寸 Industrial-process control valves - Part 3-3: Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves (IEC 60534-3-3:1998) EN 60534-6-1-1997 工业过程控制阀　第6－1部分：定位器联到控制阀执行机构的安装细则　第1节：直线传动装置上调节器的安装 Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Positioner mounting on linear actuators (IEC 60534-6-1:1997) EN 60534-6-2-2001 工业过程控制阀　第6－2部分：定位器联到控制阀执行机构的安装细则　环形执行机构定位器 Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to control valves; Positioner mounting on rotary actuators (IEC 60534-6-2:2000) EN 60534-8-2-1993 工业过程控制阀　第8部分　噪声考虑　第2节通过控制阀的流体产生的噪声的实验室测量报法 Industrial-process control valves- Part 8: noise consideration- Section 2: laboratory measurement of noise generated by hydrodynamic flow through control valves (IEC 60534-8-2:1991) EN 60534-2-3-1998 工业过程控制阀　第2部分：流通能力　第3节：试验规程 Industrial-process control valves - Part 2-3: Flow capacity - Test procedures (IEC 60534-2-3:1997) prEN 13959-2000 公称压力在DN6至DN250（含DN250）的防污染控制阀　E族A、B、C和D型 Anti-pollution check valves DN 6 to DN 250 inclusive - Family E, type A, B, C and D prEN 60534-4-1998 工业过程控制阀　第4部分：检验和常规试验　草案 IEC 60534-4: Industrial-process control valves - Part 4: Inspection and routine testing EN 1349-2000 AC-2001 工业加工控制阀门 Industrial process control valves EN 60534-2-5-2003 工业加工控制阀　第2-5部分：流量　 通过带级间恢复多级控制阀的流体尺寸方程　 Industrial-process control valves - Part 2-5: Flow capacity; Sizing equations for fluid flow through multistage control valves with interstage recovery (IEC 60534-2-5:2003) / Note: Endorsement notice BS ISO 4401-1996 液压传动.四油口定向控制阀.装配面 (Hydraulic fluid power - Four-port directional control valves - Mounting surfaces) BS EN 60534-1-1989 工业过程控制阀 .第1部分:控制阀术语和一般考虑 (Industrial-process control valves - Industrial-process control valves - Control valve terminology and general considerations) BS EN 60534-8-4-1994 工业过程控制阀.第8部分:噪声问题.第4节.流动产生的噪声的预报 (Industrial-process control valves - Noise considerations - Prediction of noise generated by hydrodynamic flow) BS EN 60534-8-2-1991 工业过程控制阀.第8部分:噪声考虑.第2节:通过控制阀的流体产生的噪声的实验室测量 (Industrial-process control valves - Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves) BS 6494-4-1989 液压阀的安装面.第4部分:03和05规格的四孔组件排气阀、模数组阀和方向控制阀夹紧尺寸规范 (Hydraulic fluid power valve mounting surfaces - Specification for clamping dimensions of four-part, size 03 and 05, modular stack valves and directional control valves) BS 5793-4-1987 工业过程控制阀.第4部分:检验和例行试验规范 (Industrial-process control valves - Specification for inspection and routine testing) BS 5944-4-1984 液压动力系统和部件所产生的空气噪音的测量.第4部分:流量和压力控制阀声功率级的测定方法 (Measurement of airborne noise from hydraulic fluid power systems and components - Method of determining sound power levels from valves controlling flow and pressure) BS 5793-5-1984 工业过程控制阀.第5部分:标记规范 (Industrial-process control valves - Specification for marking)

标准编号 标准中文名称 标准英文名称 JB/T3548-1991 制冷用R12、R22、R502热力膨胀阀 　 NF D36-405-2000 建筑阀门.膨胀阀.试验和要求 (Building valves - Expansion valves - Tests and requirements.) ANSI/ARI 750-1987 制冷剂恒温膨胀阀 (Thermostatic Refrigerant Expansion Valves) ANSI/ASHRAE 17-1986 恒温制冷剂膨胀阀额定容量测试方法 (Capacity Rating of Thermostatic Refrigerant Expansion Valves, Method of Testing for) BS EN 1491-2000 建筑物阀门.膨胀阀门.试验和要求 (Building valves - Expansion valves - Tests and requirements) JB/T10212-2000 制冷空调用直动式电子膨胀阀 　 EN 1491-2000 建筑筏门 膨胀阀 试验和要求 Building valves - Expansion valves - Tests and requirements DIN EN 1491-2000 建筑物阀门.膨胀阀门.试验和要求 (Building valves - Expansions valves - Tests and requirements; German version EN 1491:2000) JB/T10386-2002 家用和类似用途空调电子膨胀阀 　 JIS B8619-1999 静热制冷剂膨胀阀.性能试验方法 (Thermostatic refrigerant expansion valves -- Methods of testing for performance) QC/T663-2000(2005复审) 汽车空调(HFC-134a)用热力膨胀阀