公司名称 | 浙江三基钢管有限公司 | 成立时间 | 2015年10月10日 |
---|---|---|---|
总部地点 | 宁波杭州湾新区金溪路128号 |
江阴市长江钢管有限公司在江阴还是有一定名气的,专业从事无缝钢管的生产、加工、销售、仓储、配送,拥有国内最大的钢管室内仓储15万平米。产品远销全国各地。 希望我的回答可以帮到您,望采纳。
浙江钟爱ppr管有限公司很不错的。主要生产绿色环保型建材,三型聚丙烯(PP-R)管材, 管件及其配套产品。产品采用进口原材料生产,经权威部门检测,产品质量处于国内领先水平。好品...
重庆重钢集团钢管有限公司很有名气的,二战时候***的兵工厂,距今已经有120周年历史,重钢现在正在响应国家的号召“环保搬迁”由重庆市大渡口区搬迁至重庆市长寿区江南。对员工福利这一块做的到位。
维普资讯 http://www.cqvip.com
三氟乙酰基(Tfa)是Weygand最先引入到多肽合成中的。三氟乙酰基(Tfa)可用三氟醋酐导入,在稀碱液中很容易脱去。Tfa保护的氨基酸或多肽在高真空下易于气化,因而能用于气相层析以检测消旋的程度和测定天然肽的排列顺序,而且由于含有F,也可用19F NMR来检测合成肽的纯度、消旋程度以及类似物的鉴定等。由于N-Tfa-氨基酸在接肽时易于消旋,也是采用此保护基时应该注意的地方。
三氟乙酰基的引入
由于三氟醋酐同氨基酸反应时易生成恶唑烷酮而发生消旋,因此,同甲酰基的引入一样,在低温下于三氟醋酸溶液中用三氟醋酐酰化为好。一般而言,CF3COOEt/Et3N/MeOH是较好的方法,可在仲胺存在下,选择性地保护伯胺。并且该方法地聚合物方法也已得到发展。在TFAA/18-crown-6/Et3N中,伯胺与18-crown-6形成络合物,可选择性地酰化仲胺。而在仲胺存在下,CF3COO-邻苯二甲酰亚胺也可选择性地将TFA基团引入到伯胺。
一、TFAA引入三氟乙酰基示例
Chambers, JamesJ; Parrish, Jeasen C et al., J. Med.Chem., 2003, 46(16),3526-3535
To a stirred suspension of thehydrobromide salt of compound1 (1.3 g,3.6 mmol) and 4-N,N- (dimethylamino) pyridine (0.04 g, 0.3 mmol) in CH2Cl2(40 mL) was added Et3N (16.0 mL, 12.0 mmol), and themixture was cooled to 0 °C.Trifluoroacetic anhydride (2.5 mL, 17 mmol) was then added to the reaction dropwise. Themixture was allowed to warm to room temperature and stirred for 8 h. The mixturewas then diluted with CH2Cl2(50 mL) andwashed with 2 N HCl (50 mL), saturated NaHCO3(50 mL), and brine (50 mL). The organic phase was thendried (MgSO4), filtered, and evaporated to leave compound2as a white solid that was recrystallized fromEt2O (1.2 g, 92%):mp 197-198 °C.
二、 三氟乙酸乙酯引入三氟乙酰基示例
Knoops, Niele; Derioover, Geert ret al., Tetrahedron, 1997, 53(37), 12699-12716
Ethyl trifluoroacetate(9.2 mmol) was dissolved in 10 ml dry diethylether and stirred at 0 °Cfor 10 minutes. Compound1 (8.8mmol) was added and the reaction mixture was stirred at the same temperaturefor one hour. After removal of the solvent, the residues were purified by fastcolumn chromatography (SiO2; CHCl3) to give compound 2(yield98 %) as a yellow crystalline m.p.: 68-69 °C(CH2Cl2/hexanes).
三、三氟乙酸乙酯选择性保护伯胺示例
Whitlock, GavinA; Carreira, Erick M et al., Helv. Chim.Acta., 2000, 83(8), 2007-2022
Compound 1 (0.39 mmol) was dissolved in THF (10 mL), cooled to 0°C, and CF3COOEt (0.01 mL, 0.39 mmol) wasadded. The mixture was stirred at 0°Cfor 1 h and then at 23°Cfor 1 h. The solvent was then evaporated under reduced pressure to give a paleyellow oil. Purification by FC (silica gel; MeOH) afforded 2(119 mg, 85%) as colorless oil. TLC(MeOH): Rf = 0.29. [α]24D=+4.8 (c =0.48, CHCl3).
三氟乙酰基的脱去
三氟乙酰胺也是较易去保护地酰胺之一。Tfa基可以在水或乙醇水溶液中用0.1-0.2 N NaOH处理或者用1 M哌啶溶液处理很容易地脱去。由于脱去地条件温和,也适用于一些长链肽中的Tfa基的脱去,例如,Anfisen用上述条件于8 M尿素中5℃处理8小时脱去42肽中的Lys侧链的Tfa基,不过考虑到溶解度以及断链副反应等不利因素,长链肽的碱水解脱除保护基时要综合考虑各种因素。在K2CO3或Na2CO3/MeOH/H2O条件下,Tfa可在甲基酯存在下于室温去保护。也可在NH3/MeOH,HCl/MeOH或通过相转移水解(KOH/Et3Bn+Br-/H2O/CH2Cl2或乙醚)脱去。
一、KOH脱去三氟乙酰基示例
Chambers, James J; Parrish, Jason C etal., J. Med. Chem., 2003, 46(16), 3526-3535
A solution of compound 1 (1.7 g, 5.4 mmol) in MeOH (250 mL) was cooledto 0°C, and then 5 N KOH solution(30 mL) was added slowly. The reaction mixture was allowed to warm to roomtemperature and stirred overnight, and then the MeOH was removed by rotaryevaporation. The residue was diluted with H2O (25 mL) and extracted with Et2O (4 x 100 mL),dried (Na2SO4), filtered, and evaporated to afford clear oil. This oil was dissolved inEt2O (100 mL), filtered through a plug of glass wool, and neutralized by theslow addition of oxalic acid (54 mL, 0.1 Min MeOH). The solvents were removed, and the resulting white residue wasrecrystallized from MeOH to afford compound 2(0.9 g, 59%) asthe hemioxalate salt, m.p 243 °C.
二、 K2CO3脱去三氟乙酰基示例
Whitlock, GavinA; Carreira, Erick M et al., Helv. Chim.Acta., 2000, 83(8), 2007-2022
Compound 1(45 mg, 0.18 mmol) wasdissolved in 5% K2CO3 in MeOH/H2O (15 mL), and the soln. was stirred at 23°C for 4 h. H2O (3 mL) wasadded, the soln. was saturated with NaCl, and then extracted with CH2Cl2(5×15 mL). The combined org. extracts were dried(Na2SO4) and concentrated under reduced pressure toafford compound 2 (23.5 mg, 85%).
本文非原创内容,版权归原作者所有
1、制造厂家名称:浙江青山钢管有限公司
主要产品:不锈钢无缝管(外径6-830mm,壁厚0.9-40mm),不锈钢焊接钢管(外径8-2100mm,壁厚1-40mm) , 附属产品:不锈钢圆棒,不锈钢荒管(外径50-240mm)
集团荣誉:中国民营企业500强、中国制造业500强、中国黑色冶金及压延加工业500强、浙江省百强企业、浙江省制造业百强、浙江省百强民营企业;并被评选为2008年中国民营科技企业500强、思源工程先进单位、“139富民攻坚计划”先进集体;企业注册并使用的“青特”商标被认定为浙江省著名商标;公司还是中国金属协会不锈钢分会副会长单位和中华全国工商业联合会冶金业商会副会长单位;企业还先后荣获中国建设银行总行AAA级信用等级客户、中国农业银行浙江省分行AAA级资信企业、中国质量信用AAA级企业、浙江省对外贸易守信合作单位等荣誉称号。
资质证书:劳式ISO9001质量管理体系认证,8国船级社(DNV,ABS,BV,GL,LR,CCS,RINA,KR)工厂认证(不锈钢管国内认证最齐全的厂家),(TUV) PED/97/23/EC欧盟承压设备材料认证,俄罗斯GOST材料认证,美国ASME SA182产品认证,德国AD2000-WO承压设备材料认证,超声波、涡流探伤认证,中石化一级电子网络供应商,中海油一级合格供应商,全国特种设备制造许可证(压力管道)证书,全国工业产品生产许可证(锅炉及压力容器)
浙江德威不锈钢管业制造有限公司地处“丝绸之府、鱼米之乡”的浙江省嘉兴市经济开发区,坐落于长三角的中心位置,紧靠上海、杭州、苏州。