tea2025b引脚功能
TEA2025B是16脚封装的单片功放集成电路,电压2-16V
引脚 | 功能 |
1 | 地 |
2 | 输出1 |
3 | 自举1 |
4 | 地 |
5 | 地 |
6 | 反馈1 |
7 | 输入1 |
8 | 滤波 |
9 | 地 |
10 | 输入2 |
11 | 反馈2 |
12 | 地 |
13 | 地 |
14 | 自举2 |
15 | 输出2 |
16 | 电源 |
基本参数:
输出功率: 4.7 W x 1 @ 8 Ohm or 2.4 W x 2 @ 8 Ohm
输出类型: 1-Channel Mono or 2-Channel Stereo
可用增益调整: 51 dB
THD + 噪声: 0.5 % @ 4 Ohm
工作电源电压: 15 V
电源电流: 1.5 A
最小工作温度: 0 C
最大工作温度: 70 C
封装 / 箱体: PDIP-16
封装: Tube
音频负载电阻: 32 Ohm
输入信号类型: Single
输出信号类型: Differential or Single
电源类型: Single
电源电压(最大值): 12 V
电源电压(最小值): 3 V
原因及方法: 1、音响插头和插孔处有一声道氧化而接触不良. 解决方法:多次拔插音响插头或插在插孔里多旋转旋转,以磨去氧化层.还可以用橡皮擦擦拭音箱的音频插头,把它擦光亮来即可...
功放板由一个高低音分别控制的衰减式音调控制电路和LM1875放大电路以及电源供电电路三大部分组成.音调部分采用的是高低音分别控制的衰减式音调电路,放大电路由LM1875组成,它的作用是将输入音频信号放...
集成电路STV9380采用20脚PDIP封装,工作电压是±20V,工作温度为-20℃-70℃。内含基准电压产生、场激励放大、推动输出、泵电源电路等。引脚功能见下表:为了更好地了解STV9380,下面给...
ConnectorsSPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER E-9 I/O Connectors Trading Division U S B (U ni ve rs al S er ia lB us an d IE EE 13 94 1 3 2 4 TH Type Recommended PCB Layout Top View Part Number USB-B-001 *USB-B-001-30 * see Materials and Finish Specifications Insulation Resistance: 1000M ? min. Current Rating: 1A max. per co
There are 27 user-controllable LEDs on the DE2-70 board. Eighteen red LEDs are situated above the 18 toggle switches, and eight green LEDs are found above the pushbutton switches (the 9th green LED is in the middle of the 7-segment displays). Each LED is driven directly by a pin on the Cyclone II FPGA; driving its associated pin to a high logic level turns the LED on, and driving the pin low t