DT压电薄膜传感器

所属品牌： MEAS

输出： 0～7V

工作温度范围：0～70℃

特点：无源，安装方便

类型：压电薄膜传感器

电气连接：PC板安装

检测振动或冲击的动态应变片和接触式传声器 ，开关，动态应变片

DT压电薄膜传感器:The DT Series of piezo film sensors elements are rectangular elements of piezo film with silver ink screen printed electrodes. They are available in a variety of different sizes and thicknesses. The DT film element produces more than 10 millivolts per microstrain, about 60 dB higher than the voltage output of a foilstraingage.Thecapacitanceisproportional to the area and inversely proportional to the thickness of the element. The DTseriessensors are the simplest form of piezo film sensors, used primarily as dynamicstraingagesandcontact microphones for vibration or impact detection. These are available without anyleadsforthose applications where the customer wants to make his own lead attachment. They can be readily adhered to a surface with double-sided tape or epoxy. Lead attachment can be achieved by compressive clamping, crimps, eyelets, conductive epoxy or lowtemperaturesolders.DTelements are supplied with a thin urethane coating over the active sensor area; the lead attachment legs are free of the insulating urethane coating.

带引出的DT系列压电薄膜传感器：指在薄膜上丝印银浆作为电极的矩形的压电薄膜传感器，它可以做成许多种不同的尺寸和厚度，引出线为28AWG线，长度为12英寸（300mm），由铆钉将其压接到薄膜上。DT系列传感器每微米的应变能产生10毫伏的电压，其电容与工作面积成正比，与薄膜的厚度成反比。DT系列传感器工作区域表面的一层防护层能保护银浆不被氧化。

相关型号：DT1-028K w/rivets、DT1-052K w/ rivets、DT2-028K w/rivets、DT2-052K w/ rivets、DT4-028K w/rivets、DT4-052K w/ rivets。

量程： 15 mV/με，最大1%形变1～117 Hz

封装：薄膜元件

工作温度范围：0～70℃

供电电源：无源

特点：超薄、柔软、耐用，可承受1%形变

类型：柔性薄膜，粘贴安装

电气连接：双绞线

力的直接监测，事件的记录时间，冲击次数的计数器，监测冲击的相关参数，拾音器