邦仕嘉界面剂

待邦仕嘉界面剂涂抹干透或"造毛"养护干燥后即可开始抹灰或批刮腻子，用1:1水泥砂浆加入水泥胶浆，将其抹在瓷砖背面找平压实，砂浆自上而下进行，并随时用靠尺检查平整度。

粘结墙布和壁纸时如觉粘度高可加少量水稀释，用邦仕嘉界面剂"造毛"不得加水使用。消耗量:理论上，1公斤邦仕嘉界面剂可涂布10平方米(一遍)，实际用量因施工中多种因素影响的而定。

Bosia interface agent is a new type of new water-soluble high polymer concretes contact surface finishing agent, and the outward appearance is the cream color liquid cement. Apply to indoor concrete, aerated concrete, masonry walls approved blows the putty plastering the dense basic level before treatment, apply to the paste before the wall tiles artificial basic level to "create roughness".

Have excellent permeability, can fully infiltrating the substrate surface, so that basic dense, enhances smooth interface attachment. its non-toxic, tasteless, green products.

Construction requirements and Attention

The level should be a solid surface, no floating ash and solid oil.

Bosia interface agent will be coated in the walls with roller brush afterdiluted with 20 percent to 30 percent of the water, coated 1-2 times.

Create roughness: Stirs the thick liquid with the cement and the Bosia interface agent contact surface medicinal preparation pappy, tools applied at the basic level on.

Construction of temperature in more than 5 ℃, unused plastic sealed attention.

This refuses with other brand adhesive mix use.

Usage and amount used

Bosia interface agent to be applied dry or agent, "created roughness" conservation dried or grant to start plastering or blows the putty , to join with 1:1 cement mortar cement mortar, the tiles in the back of his hand leveling compaction, mortar Top-down, and at any time with the formation of the inspection on foot.

When felt wall fabric and wallpaper, adding a small amount of water can be diluted if high viscosity .use Bosia interface agent to "create roughness" without water. Consumption: In theory, one kg of Bosia interface agent can be coated 10 square meters (for one time), the actual amount due to construction of a number of factors affect them.

Storage and transport

The goods stored in 5 ~ 40 ℃ cool ventilation, no insolate and suffer freeze, the durability period is 12 months. its noncombustible and non-toxic products, transport and storage according to "non-dangerous goods rules" .

基层表面应坚实、无浮灰和油渍。

将邦仕嘉界面剂缴入20%-30%的水稀释后，用辊刷涂布在墙面，涂1-2遍。

造毛:用水泥和邦仕嘉界面剂搅拌成浆糊状，用工具涂抹在基层上。

施工温度在5℃以上，未用完的胶注意密封。

本品严禁与其他品牌的胶粘剂混合使用。