步进电机驱动器概述

步进电动机和步进电动机驱动器构成步进电机驱动系统。步进电动机驱动系统的性能，不但取决于步进电动机自身的性能，也取决于步进电动机驱动器的优劣。对步进电动机驱动器的研究几乎是与步进电动机的研究同步进行的。

F3922、F3722L、F3722、F3722A、F3722M、F368、F3522A、F3522H、F3522、F2611、F268C、 F875、F556、F256B、F265、F255、F235B、F245、F223

F 3 5 2 2

1、F表示步进驱动器

2、表示相数，2表示两相，3表示3相

3、5表示电流5安培

4、22表示电压220V

VIX步进电机驱动器

ViX微步进驱动器

功率单元具有全PWM控制使用正弦转换。用户可选择解角器或编码器反馈。标准RS-232界面，同时现场总线模块提供CANopen 和 RS-485通讯。Compumotor. ViX驱动器适合在高动态、多轴应用中使用，而不需要独立电源供给，在分布式控制中，它可作为一个独立的驱动器/控制器使用。

VIX Series

Small, Intelligent and Powerful Digital Servo/Stepper Drives and Drive/Controllers

With its all-digital, DC-powered design, the ViX family of awardwinning

drives and drive/controllers offers a new level of

economical servo performance. Available in both drive-only

and intelligent-drive/controller platforms, the ViX family gives

users a robust and cost-effective DC product, particularly in

multi-axis applications.

Designed for easy set-up and tuning, the ViX uses wizardsbased

software that enables users to implement a fully

configured system within minutes of unpacking the unit. Its

small size–just 4.9 x 1.65 x 3.35 inches–makes it ideal for

narrow applications and for direct-panel mounting, or for

attachment to a standard DIN rail using an optional adapter.

ViX General Features

· Up to 80VDC bus voltage

· Compact size: 4.9 x 1.65 x 3.35 inches

· Standard RS232C ASCII interface

· 5 digital inputs and 3 digital outputs (software configurable)

· CE (EMC & LVD), UL compliant

· Auto-correction of motor phase/feedback wiring (servo

only)

Servo-Specific Features

· Accepts analog (±10V), step/direction, CW/CCW signals

· Encoder following

· Current outputs of 2.5A RMS continuous and 5A RMS

continuous

· Resolver or encoder feedback

Stepper-Specific Features

· Integer selectable resolution from 200 to 51,200 steps/rev

· Anti-resonance circuitry suppresses mid-range instability

· Recommended motor inductance range of 0.5 mH to

20 mH

Servo and Stepper Optional

Controller-Specific Features

· Storage of up to 16 sequences

· Encoder following, registration, feed-rate override

· 5 digital inputs, 3 digital outputs, 1 analog input

· Conditional statements

· Optional RS485/CANbus interface

ViX Common Specifications

Drive Input Power

Voltage

ViX500 48-80VDC +5%, -15%

ViX250 24-80VDC +5%, -15%

Controller input power 24VDC, 250mA (no outputs loaded)

Drive Output Current Servo Stepper

ViX500 5A RMS continuous, 15A RMS peak* 8.0A pk (5.6 Arms)

ViX250 2.5A RMS continuous, 7.5A RMS peak* 4.0A pk (2.8 Arms)

Physical

Compumotor motors See table on page 3

Motor inductance range 0.5-10mH recommended (speed range reduced if >10mH)

Motor current limit Selectable by software

PWM/Motor ripple frequency 20 KHz/40 KHz

Protection Short-circuit, brownout, over-voltage, under-voltge, drive/motor over-

temperature I2t, feedback fault

Performance

Feedback device (servo only) Resolver or quadrature encoder (selected by software)

Resolver feedback (servo only) 12-bit A-to-D input (gives 4096 counts/rev), absolute

accuracy 30 arc-min

Encoder feedback 5V differential, 400 KHz max. input frequency (pre-quadrature),

resolution 1000, 1024, 2000 or 5000 lines

(i.e., up to 20,000 counts/rev). The H series has fully variable resolution and will support

up to 2.5 MHz

pre-quadrature encoder input.

Encoder supply 5V output for feedback and following encoder, 250mA maximum loading

Drive Command Inputs

(AE, AH models only)

Velocity and Torque modes ±10V differential, 12-bit resolution

Position mode Step/direction, step+/step- or quadrature encoder** input with resolution

equivalent to feedback device

Digital Inputs 5, of which 4 are configurable as Home, Limits and Registration. Operating

range 5V to 24V. Software

configurable 4K7 pull-up/active low or 4K7 pull-down/active high

Encoder following input Compatible with feedback resolution, max. input frequency

2.5MHz. Also configurable as step/direction

or step+/step- input

Outputs

Digital outputs 3 - 1 is configurable as Drive OK. Software-configurable active-low/sinking

(5V-24V) or active-high/

sourcing (24V only). 50mA maximum per output

Encoder output Fixed resolution (dependent on feedback device)

Fault output NPN open-collector output, normally low, active high

Analog output 10-bit filtered PWM monitor output, torque or velocity

Motor brake output 24V, 2A maximum, energized to release

Communication

Communication interface 9-pin D-shell (female) connector for RS232 (standard);

combined RS485 & CANopen option available

High-speed interface Dual RJ45 connectors for CANopen, RS485 option, etc., also

provide daisychain ports for multi-drop

RS232 connections

Diagnostics

LEDs 3 LEDs for feedback, drive and communication status

Environmental

Drive temperature range 32-122°F (0-50°C) local environment fan (fan cooling required

about 104°F (40°C)

Humidity 0-95% non-condensing

1、生产厂家生产步进电机驱动器;

2、替代原来的步进电机驱动器中的芯片;

3、替代原设备产品中的步进电机驱动器和步进电机驱动电路;

4、其他需要步进电机驱动的场合。

THB6064H具有其他芯片例如:TA8435、TB6560HQ一样简单的外围电路，大封装可DIY的良好操作性能。也具有BY-5064的高细分 译码的低振动、小噪声良好性能。还可以通过参考电路设计方便的实现多组驱动电流的设置，半流控制功能;通过衰减模式调节端 实现快慢和混合衰减调节;通过UVLO检测使得芯片逻辑电路供电电压Vc低于3.9V输出关闭，大于4.0 V输出开启保护功能;通过芯 片内的过热和过流检测可以很方便的设计驱动器保护电路，通过二进制逻辑电路4位选择设置8档细分控制(1/2,1/8,1/10, 1/16, 1/20, 1/32, 1/40, 1/64 )。