2007工程机械与车辆工程新进展国际学术会议论文集

《2011工程机械与车辆工程新进展国际学术会议论文集》内容简介：The 2011 International Conference on Advances in Construction Machinery and Vehicle Engineering （ICACMVE'2011）is one of the academic conferences originated by Chinese Construction Machinery Society（CCMS）, and it was organized by Tongji University and Shanghai Maritime University, and jointly sponsored by National Natural Science Foundation of China and Administration Committee of Changsha National Economic and Technical Development Zone of China. After peer-reviewed, 140 papers presented by participants from China, United States of American, Germany, Japan, Russia, Canada,Australia, the Netherlands and Singapore were accepted for publication. The proceedings offered an opportunity of bring together worldwide academic researchers and industrial practitioners for the interchange of information on the latest development and applications in Construction Machinery and Vehicle Engineering technology. It is our sincere hope that researchers and developers will benefit from these papers.

1.Introduction to Keynote Speeches on ICACMVE'2011

2.Numerical Simulation Research on Hydraulic Stewart Force Feedback Manipulator

3.Motion Simulation Based on Virtual Reality

4.Research on the Closed Hydraulic Regeneration System of the Boom Potential Energy in Hybrid Excavators

5.Design a New Type of Double-Parallel Platform Road Simulation System

6.Design of a Novel Vehicle Active Suspension and Its Simulation Research

7.Special Vehicle Driving Simulator with Motion Presence

8.Research on Servo Controller of Hydraulic Excavator Dynamic Simulation Test System Based on System on Chip

9.Research on Control Strategy for Active Suspension Based on Inertial Control Theory

10.A Fast Forward Kinematics Algorithm for 3-RPS Parallel Mechanism

11.The Integration Re-Design of Construction Machinery Hydraulic Components

12.Research on Working Characteristics for the Steel Ropes of Large Ship-Unloader's Hoisting Mechanism

13.Dynamical Analysis and Structural Optimization of Pulling Arm of the Hook-Lift Compressed Rubbish Truck

14.Dynamic Load Analysis of Excavator Main Pumps Based on Stochastic Theory

15.Multidisciplinary Optimization of Mixing Blades Based on Parameter Sensitivity Analysis

16.An Engineering Method for Asphalt Foaming Modelling Integrating Gas-Liquid Phase Change Process

17.An Engineering Method for Parameter Sensitivity Analysis of Asphalt Foaming

18.The Foaming Chamber Design and Evaluation Based on the Analysis of Bitumen Foaming Essential Characteristics

19.Master-Slave Control for Construction Robot Teleoperation-An Improved Variable-Gain Velocity Control with Force Feedback

20.The Selection of the Dozer-Determination of Optimal Parameters of the Bulldozer for Specified Work Conditions

21.Machinery in Information Oriented Construction in Japan

22.Modeling and Analysis of Hydraulic Pile Hammer System

23.Fluid-Solid-Heat Coupling Analysis of the Problem of Hydraulic Slide Catching

24.Loading Capacity Analysis of a 3-SPS-S Mechanism for Segment Assembly Robots in Shield Tunnelling Machines

25.Research on Power Control System in Various Operating Conditions for Loader

26.A Study of Point Disposal for a Sort of Heterogeneous Cylinder Series Levelling Mechanism and Optimum Design

27.The Theory Analysis of Double Spiral Rotary Hydraulic Motor Basing on Virtual Work Principle

28.Dynamic Characteristic Analysis of Walking Mechanism of Roadheader

29.A Dynamic Pressure Simulation of Electro-Hydraulic Proportional Variable Pump Based on AMESim

30.Dynamic Optimization Design Research of Truck Mounted Pump Boom Based on Concrete Flowing Impact

31.Heat Balance Mechanism Analysis in the Hydraulic System of Concrete Pump

32.Application of Topology Optimization in Lightweight Design of Concrete Pump-Truck Booms

33.Optimization Design of Backhoe Hydraulic Excavator Working Device Based on Feasible Digging Area

34.Research on the Influence of the Ratio of Normal and Tangential Digging Resistance on the Stability against Leaning orward of Backhoe Hydraulic Excavator

35.Strength Analysis of Working Device of Hydraulic Excavator Based on VB and ANSYS

36.CMAC and PID Compound Control of Twin-Spool System

37.The Theory of Determining Damage Location of Steel Towers

38.Force Analysis of Connecting Rod between Separate Transportation Vehicles

39.Fault Diagnosis of TTW30 Excavator/Loader Hydraulic Driving System

40.Dynamics Analysis of Compactor Based on Rigid-Flexible Coupling Model

41.Grader Service Life Estimation Based on Load Spectrum

42.Modeling and Strength Analysis of Blade Circle Frame Used in Grader Working Device

43.Estimation Method of New Bulldozer Load Spectrum Based on Similar Structure

44.Tower Crane Good Condition Diagnosis System Development

45.Analysis of Hydraulic System of 250 Tons Tripod Jack Test Stand

46.Dynanuc Response Analysis of Vehicles and Low Frame Bridge System Based on Multi-Body Dynamics

47.The Research and Development of an Intelligent and Rapid Design System for Ship Loader

48.Following Control Research on Booms of Concrete Pump Vehicles

49.Discussion on the Opportunity for Skid Steer Loader's Development under the Background of Aging Society in China

50.Discussion Debugging Analysis about Directional-Control-Valve on YC50-8 Excavator

51.Design Expert System of Hydraulic Excavator Using Relevant Matrix for Knowledge Representation

52.The Technical Scheme and Advantage of Full-Electro-Hydraulic Proportional Control Excavator

53.Several Key Issues on Design and Development of Tyre Roller

54.Ultracapacitor-Based Auxiliary Energy System for Construction Machinery

55.Analysis and Improvement of Heavy-Duty Test Equipment Based on ANSYS

56.The Research and Application of Load Sensing Hydraulic System on Construction Machinery

57.Study on Electronic Braking Force Distribution Control Strategy of the Tractor-Semitrailer Vehicle

58.Application of Time-Domain System Identification Techniques for Crane Structure Based on Output-Only Measurement

59.An Indirect Free-Interface Component Mode Synthesis Technique

60.Vibratory Mixing and the Improvement of Concrete Performance

61.Study on the Load Sensing and Control Strategy of Hybrid Wheel Loader

62.Bulldozer Ripper Co-Simulation Based on ADAMS and SimHydraulics

63.Dynamics Research on Driving Shaft of Heavy Load Multi-Body System

64.Matching Calculations and Co-Simulation Based on Elevated Sprocket Bulldozer Powertrain

65.Comparison on the White Light and the Laser Inline Measurement Technique in the Dimension Control of Car Body

66.Transient Performance Analysis of a Thermo-Electric Generator Installed in EGR Path of a Diesel Engine

67.Spark Ignition Strategies for Extending Combustion Limits of Diluted Charge for Modern Engines

68.Investigation of the Spray Morphology and Breakup of Diesel/Biodiesel Blends Using Ultrafast X-Ray Imaging

69.Digitallntegration Processing of Diesel Cylinder Head Vibration Acceleration Signal with Multiple Moving Average Method to Eliminating Trend

70.The Analysis of Noise and Vibration in Drum Brake Systems of Vehicles Based on Numerical Analysis

71.Simulation Analysis on Flexible Multibody Dynamics of Drum Brake System of a Vehicle

72.Adaptive Electronic Differential Control Technology of Wheel Electric Driving System

73.Study on Temperature-Field Test of Combination Piston for a Certain Type of Diesel Engine

74.Static Stress Analysis of a Diesel's Connecting Rod by Experiment and Simulation

75.Probe into a New Type of Wind Resistance Brake Mechanism

76.Numerical Simulation on the Working Process of High Power Diesel Engine in Plateau Area

77.The Choice of Working Medium in Low-and-Medium Temperature Cogeneration Technology and the Effect to System

78.Influence of Geometry Parameters on the Section Distortion of Thin-Walled Rectangular Tube during Rotary Bending

79.Development and Analysis of Automotive Electronic Standards

80.Design and Analysis of the Performance Testing Equipment for Automobile Steering Meshing Pair

81.Design of LIN Bus Data Logger Based on 8-Bit MCU

82.Psychoacoustic Analysis of the Noise of Air Supply System on Fuel Cell Vehicles

83.New Method in Analysis Manufacture Symmetry on Inner Structure of Multi-Hole Nozzle

84.Analysis of Air Fuel Ratio and Combustion Characteristics of GDI Engines at Cold Start Condition

85.In-Cycle Misfire Control on a GDI-HCCI Engine Employing Ion Sensing Technology

86.Research Progress of Thermal Management of Li-Ion Batteries in Electric Vehicles Using Phase Change Materials

87.Research of Wind Cooling Technology for Electric Vehicle Li-Ion Battery Pack

88.Design Optimization of Electro-Hydraulic Actuation System of Variable Nozzle Turbocharger (VNT)

89.Engine Exhaust Manifolds Durability Analysis

90.Real-World Gaseous and Ultrafine Particle Emission Characteristics of an Euro Ⅳ Diesel Bus

91.A Test Method for Automotive Door Glass Motion Deviation

92.Review of Battery's Charging and Discharging Efficiency

93.Thermal Simulation and Test of Lithium-Ion Battery for Electric Vehicle

94.Fluid Power Transmission Characteristics of Aviation Kerosene

95.Analysis of Attitude Control Method of Flight Machine Based on Gas-Jet Side Force

96.New HST Makes Easy Utilization of Ocean Wave Energy

97.Research on Spiral Strip Suppression Effects on Vortex-Induced Vibration of Water Riser Pipe Based on Numerical Wave Tank

98.Application of I2C Bus in Embedded Simulation System of Electric Propulsion System

99.A High-Precision Positioning Approach for GPS in Bulk Ports by Using Kalman Filter with Pre-Calculated Factors

100.Data Mining Technology and its Application in Air Cargo Business

101.License Plate Character Neural Network Recognition Based on Wavelet and GA Optimization

102.Studies on the Inertial Effect in Fluid Transport Using a Simplified Porous Media Model

103.Experimental and Numerical Studies on the Suppression of Vortex Induced Vibrations Using Helical Strakes

104.A Novel Yard Allocation Approach for Expofl Containers in Container Terminal

105.Working Process Visualization of Bucket Wheel Stacker

106.Construction of Container Terminal Distributed Cooperation Virtual Environment

107.The Tendency Research of Modern Engineering Logistics and Equipment Technology

108.Research on CAN-Based Control System for Dynamic Compaction Machine

109.Calculation and Simulation Study on Temperature Field of Dry Dual-Clutch's Friction Plate

110.Study on Vibration Reduction and Design of Dual Mass Flywheel

111.Application of Risk-Based Maintenance Approach in Automated Storage and Retrieval System

112.The Holistic Capability Evaluation of Military Construction Machinery on the Base of AHP

113.Research on Collaborative Design Workflow System of Complex Products in Construction Machinery

114.Application of Top-Down Method in 55ZJC Type Shield Hauler

115.Research of Intelligent Fault Diagnosis for Hydraulic System of Cranes Outriggers

116.Study of the Crane Comprehensive Evaluation Index Syste

117.Tamping Machine Fault Diagnosis Based on Fuzzy Inference

118.Application and Scheme Comparison of CCHP System in Huanghua Airport

119.Fault Diagnosis of Bearing Based on Integration of Nonlinear Geometry Invariants

120.Research and Application of Engineering View Generation Based on Secondary Development of SolidWorks

121.7.5 Meters Aerial Work Platform Mechanics Performance Analysis under Typical Working Cases

122.Wheel-Rail Contact Analysis of Vehicles in a Low-Frame-Bridge System in Quay

123.Study on Time-Variation Dynamics Model for Gearbox with Gear Crack Fault

124.Steady-State Thermal Equilibrium Analysis to the Transfer Case of Heavy Vehicle Based on ANSYS

125.Robotic GMAW Surfacing Remanufacturing Forming for Construction Machinery Parts

126.Hydraulic Motor Fault Tracing Based on Casting Quality

127.Working Fluid Selection for the Organic Rankine Cycle in Slag Quenching Water of Blast Furnace Power Generation System

128.The Function Analysis and Design of Alien Shape Stone Multi-Function NC Machining Center

129.An Optimization Method for Fault Recognition of Rolling Bearing Based on Wavelet Neural Networks

130.Dynamic Modelling and Its Analysis of the Rigid-Flexible Coupled Linkage System with Second-Order Effects

131.Dynamic Simulation and Fatigue Vibration Analysis of the High Speed Bearing for Wind Turbine Gearbox

132.Feasibility Study and Simulation of B Pillar Made of Q&P Steel

133.Study on Electrostatic-Structural Coupling Characteristic of Microcantilever

134.Study on the Impact Resistance of Micromachined Gyroscope Spring Beams

135.The Design of Multi-Function Detection System ofAerial Working Platform Safety Lock

136.A Comparative Simulation Study of Evolutional Wavelet Based Denoising Algorithms

137.Research on Time-Different Ultrasonic Flowmeter Based on Cross Correlation Theory

138.The Application of Adaptive Algorithm on Automobile Sunroof Control System

139.Parameters Research and Improvement of Ant Colony Algorithm

140.Welding Mechanism of Aluminum Alloy under the Emergent Condition of Unprotected Gas

141.Research on Remanufacture Technology by Iron Alloy Plating Method

《中国公路学会桥梁和结构工程分会:全国桥梁学术会议论文集(2011年)》为中国公路学会桥梁和结构工程分会2011年全国桥梁学术会议论文集。《中国公路学会桥梁和结构工程分会:全国桥梁学术会议论文集(2011年)》可供国内外桥梁专业人员工作和学习时参考使用。